News

News

Resistance Testing Methods for Semiconductor Cleanroom Gloves: A Practical Guide
10/31/2026

Resistance Testing Methods for Semiconductor Cleanroom Gloves: A Practical Guide

Based on ANSI/ESD SP15.1-2011, this article explains the complete resistance testing method for semiconductor cleanroom gloves: the distinction between intrinsic material resistance and in-use resistance, the required equipment, environmental and sample requirements, the operating steps for the bare-hand baseline and three voltage levels, result interpretation ranges, and common pitfalls. It can be applied directly to on-site acceptance and incoming inspection.

Read More
Application Value of Cleanroom Mops in Pharma Industry
10/19/2026

Application Value of Cleanroom Mops in Pharma Industry

Pharmaceutical cleanrooms shall comply with GMP requirements to control particulate matter and microorganisms. Traditional cotton mops tend to shed fibers and harbour bacteria, which carry risks of product contamination and non-compliance during audits. Medical-grade cleanroom mops are made of continuous filament polyester / microfiber with ultrasonic edge-sealing technology. They feature low particle generation, resistance to a wide range of disinfectants, sterilizability and strong particle adsorption, suitable for GMP Grade A/B/C/D cleanrooms, microbiology laboratories and other areas. Disposable sterile mop heads are selected for Grade A/B zones, while re-sterilizable types are adopted for Grade C/D zones. Colour-coded zone management can reduce product rejection and the risk of out-of-specification environmental monitoring. Complete supporting validation documents facilitate incorporation into SOPs to meet drug regulatory inspections. Selection based on cleanroom classification, proper storage and periodic testing are required in use. Such mops serve as critical cleaning consumables for pharmaceutical manufacturers to control cleanroom environments, ensure drug quality and maintain GMP compliance.

Read More
Dongshan Precision (002384.SZ) has end-to-end capabilities spanning research and development, design, and mass production of AI PCBs and optical modules (inclusive of optical chips).
10/15/2026

Dongshan Precision (002384.SZ) has end-to-end capabilities spanning research and development, design, and mass production of AI PCBs and optical modules (inclusive of optical chips).

Gelonghui, Oct 14 | Dongshan Precision (002384.SZ) said on the interactive platform that it owns end-to-end R&D, design and mass-production capabilities for AI PCBs and optical modules (including optical chips), with strengths in co-iteration of optical chips and modules. Its in-house optical chips help cut optical module costs, enhance supply chain autonomy and lift product profitability. ([Hexun.com](https://Hexun.com))

Read More
Valumax for "Clean Anti-Slip Nitrile Glove," Reinforcing Its Clean-Protection Technology
10/13/2026

Valumax for "Clean Anti-Slip Nitrile Glove," Reinforcing Its Clean-Protection Technology

Valumax (Suzhou) Ultra-Clean Technology has obtained patent authorization from the CNIPA for its "Clean Anti-Slip Nitrile Glove." Addressing the slippery-grip problem of conventional cleanroom nitrile gloves, the patented product enhances handling stability while maintaining high cleanliness and low-extraction performance — ideal for semiconductor and precision-electronics cleanrooms, and a further addition to Valumax's clean-protection lineup.

Read More
AMEC Chairman Yin Zhiyao: Equipment is the "lifeline" of the semiconductor industry — AMEC responds to industry consolidation with a platform-based strategy.
10/13/2026

AMEC Chairman Yin Zhiyao: Equipment is the "lifeline" of the semiconductor industry — AMEC responds to industry consolidation with a platform-based strategy.

"Chip design and manufacturing sit at the head of the industrial chain, driven by end-user applications. Semiconductor equipment, by contrast, is the very foundation of the industry, extending downward to components and materials. For a nation's semiconductor development, equipment, components, and materials are the chokepoint," Yin Zhiyao said.

Read More
Huahong Wuxi's Phase III Capital Increase of 4.16 Billion Yuan: The New Layout of the Big Fund Phase III and CDB Capital
10/8/2026

Huahong Wuxi's Phase III Capital Increase of 4.16 Billion Yuan: The New Layout of the Big Fund Phase III and CDB Capital

Tianyancha App shows that Wuxi Huahong Grace Phase III Semiconductor Co., Ltd. recently completed a very rare industrial and commercial change: its registered capital surged from the initial 6.68 million US dollars to 4.17 billion US dollars, with an increase of up to 62,325%. This company was established in October 2025, less than a year ago. In the early stage of its establishment, it was nothing more than a shell company with only meager start-up capital; a year later, it suddenly transformed into a super capital carrier worth tens of billions.

Read More
With a total investment of 12 billion yuan, the Xian Da Xinguang optoelectronic chip base has been put into operation in Optics Valley.
9/30/2026

With a total investment of 12 billion yuan, the Xian Da Xinguang optoelectronic chip base has been put into operation in Optics Valley.

It is learned from the official WeChat account "China Optics Valley" that on September 28, the wafer fab of Leadcore Optoelectronics Technology (Wuhan) Co., Ltd. (hereinafter referred to as "Leadcore Optoelectronics"), a subsidiary of Leadcore Technology Group, went into operation in the East Lake Comprehensive Bonded Zone.

Read More
TSMC plans to launch the construction of its second campus in Texas to expand its manufacturing business layout in the United States.
9/30/2026

TSMC plans to launch the construction of its second campus in Texas to expand its manufacturing business layout in the United States.

Citing reports from the semiconductor industry in Taiwan's Economic Daily, TSMC plans to expand its U.S. manufacturing footprint by launching a second campus construction project in Texas, with the total estimated investment exceeding that of its Arizona site. The total investment in TSMC's Phoenix, Arizona plant has been raised to 265 billion U.S. dollars, with plans for six wafer fabrication facilities, two advanced packaging plants and one R&D center. Industry insiders believe that Dallas and North Texas have advantages in supply chain and talent resources, but TSMC's board of directors has not yet made a final decision.

Read More
The total planned investment is 34.9 billion yuan! Changxin Technology has officially announced the investment and construction of two major new projects.
9/29/2026

The total planned investment is 34.9 billion yuan! Changxin Technology has officially announced the investment and construction of two major new projects.

On the evening of September 28, Changxin Technology issued an announcement stating that it plans to use 1.3 billion yuan of over-raised funds to invest in the construction of a new technology R&D project. At the same time, the company plans to provide 500 million yuan of over-raised funds to its wholly-owned subsidiary Changxin Storage Products (Hefei) Co., Ltd. (hereinafter referred to as "Changxin Products Hefei") through capital increase and loan, for Changxin Products Hefei to invest in and construct the "Phase II Project of the Backend Testing Base for Storage Wafers of Changxin Storage Products (Hefei) Co., Ltd."

Read More
VALUMAX Participates in SEMICON China 2026
3/15/2026

VALUMAX Participates in SEMICON China 2026

VALUMAX showcases latest ESD and cleanroom solutions at SEMICON China 2026.

Read More